Closed roller set, with control box (without display), for cars and transporter vehicles

Roller set closed, hot-dip galvanised, 12 m pre-wiring
-  Low-wear rollers, 205mm diameter, welded profile surface
- Adjustment screws for height adjustment, prepared for weighing device
- Track width min. 800 mm, max. 2,200 mm
- Drive motors 2 x 3 kW - test speed 5 km/h - braking power 4.5 kN
- testable axle load at 50% braking 2.0 t
- Wear-free, electronic DMS measuring system with shear force transducer
- Control box with motor protection switch, control electronics, operating elements and main
switch lockable, prepared expansion to a test lane with tracking and shock absorber tester
- Manual / automatic operation, delayed automatic switch-on, start-up monitoring, slip switchoff,
switch-off after driving out of the test bench and drive-off assistance
- Test program for electronic parking brakes

- Electrical/switch box, housing dimension W x H x D: 380 x 380 x 220 mm

Technical data for roller set “BPS-Kompakt- 3.5”:
- Self-supporting, closed roller set: hot-dip galvanised
- Traversable axle load: max. 4 t
- Roller length: 700 mm
- Track width min. / max.: 800 / 2,200 mm
- Roller diameter: 205 mm
- Roller profile, welded: Friction value dry / wet 0.9/0.8
- Slip roller diameter: 50 mm
- Roller centre distance: 400 mm
- Test speed/drive capacity: 5 km/h, 2 x 3 kW
- Maximum braking power: 4.5 kN
- testable axle load at 50% braking: 2 t
- Supply voltage: 3 x 400 V 50 Hz
- Supply line / fuse protection 3 / 4 kW ( 5 kW:) 5 x 2.5 mm² (5 x 4 mm²) 3 x 20 A (25A)
- Mass per roller set: (W x L x H) 2,320 x 680 x 240 mm
- Weight: 440 kg