Scope of delivery: - Scissors hoist with 4 hydraulic lift cylinders
- Platforms (4.4 m) with chequered metal covering (screw-fastened) and platforms for axle lift
- Hydraulic unit and oil tank mounted under the left platforms
- Emergency lowering device
- Control unit, for wall assembly
- Acoustic lowering signal
-
Ascent ramp and roll-off protection due to different set-up options of
the lift (above-ground or foundation assembly) not included in the
delivery scope, see options!
Description:
- The platforms are constructed with U-profiles and rectangular tube frame and features screw-mounted metal coverings. After removing the metal coverings, the parts underneath, such as: Hydro unit, oil tank, hydraulic valves, hydraulic cylinders, and others are freely accessible for maintenance and assembly
- No fixed connection between the scissors, enabling variable set-up width, each side of the scissors lift features hydraulic and electrical systems pre-installed
- Large lift height with 2,070 mm, which is also ideal for installation in a strip foundation
- Maintenance and wear-free, self-lubricating bearing bushings on the scissor bolts
- Hydraulic unit with submerged motor
- Reliable safety system via 4 lift cylinders with electrical poppet valves
- Synchronisation control and safety monitoring for both platforms via electronic height measurement and electronically controlled proportional valves
- Safety lowering device with acoustic signal controls
- Control box with control elements and control electronics
- Option wheel free jack: integrated level in the platforms, preventing and projection
- Lifting platform and options according to UVV and CE directives
Technical data:
- CE load
bearing capacity:
|
4.2 t
|
- Recommended
installation width external:
|
2,190 mm
|
- Lifting
height / lifting travel:
|
2,080 / 1,800 mm
|
- Above-floor
ascent height (with wheel free jack):
|
290 mm (adjustable 280-300 mm)
|
- Platforms
with attachment parts for roll-off protection:
|
5,200 x 680 mm
|
- Standard
lifting time/lowering time (short hoist time):
|
40 (optional 18) / 30 sec
|
- On-site
oil filling, HLP ISO 46:
|
45 litres
|
- Coating:
|
Powder-coated (optional hot-dip galvanized platforms)
|
- Motor
power of drive unit:
|
4.5 kW
|
- Supply
voltage:
|
3 x 400 V / 50 Hz
|
- Supply
line/fuse protection:
|
5 x 2.5
mm² / 20 A slow fuse (5 x 6.0 mm² / 32 A slow fuse with short hoist time)
|
- Required
residual current operated device:
|
0.3 A,
RCD type B (with short
hoist time)
|
- Dimensions
of controller/electrical switch box WxHxD:
|
500x500x210
mm (600x600x250 mm with short
hoist time)
|
- Weight
per lifting platform:
|
Up to 2,500
kg, depending
on the equipment |